Reverend Founder Joe Naylor has been on a quest to meld a solid body’s sustain and attack with the rich, big tone of a semi-hollow. Naylor’s sonic dream is now a reality with the introduction of the Reverend Airsonic. Radically thinner wings and thru-body f-holes allow the body to resonate intensely, while a thick center ridge establishes solid sustain. Harmonics shimmer, single notes sing, and power chords ring like a bell at stage volume. Add in overdrive, and the controllable feedback is a thing of beauty. With the forearm and stomach contours, this guitar is light and comfortable. The Airsonic W has Railhammer Humcutters that capture the clarity and dynamics of a P90 without the hum. A Wilkinson WVS50 IIK Tremolo in the bridge rounds out the package. If you’re ready to make a unique visual and sonic statement, the Airsonic W is for you!

FEATURES

Railhammer Pickups:  Rails under the wound strings for tight lows. Poles under the plain strings for fat highs. This revolutionary design from Reverend founder Joe Naylor delivers exceptional clarity and punch, that will get you heard loud and clear!

Roasted Maple Neck:  Roasted Maple is heat treated at over 300° F to remove sugars, moisture, and impurities. This maple is lighter, more stable, and has a beautiful caramel color. The result is an exceptional maple neck that will require less seasonal adjustment, and boasts a rich vintage look!

Korina Body:  Korina (aka White Limba) is a medium-light weight wood, highly prized for consistency and tonal qualities. Often found in boutique and vintage instruments, all Reverends feature Korina bodies. A highly resonant wood, Korina is a key factor to producing our lively, responsive instruments that are rich in harmonics.

Bass Contour:  This passive bass roll-off is great for tightening up the low end, or re-voicing the pickups. It can make a humbucker sound like a single-coil, or give a P-90 that classic twang. Variable pickup voicing at your fingertips!

Pin-Lock Tuners:  A thumbwheel under the tuner pushes a steel pin up through the post, locking the string in place for exceptional tuning stability and super-fast string changes.

Initialed Headstock:  Every Reverend is hand initialed and serial numbered on the back of the headstock by one of our highly skilled technicians who sets up, inspects, and tests every instrument.

Wilkinson WVS50 IIK Tremolo:  Features include saddles that lock to the baseplate, adjustable arm swing tension, and a push-in/no freeplay arm. Combined with our boneite nut and pin-lock tuners, it stays in tune even under aggressive whammy action.

Vari-Claw Tremolo Claw:  This innovative claw gives you the option of 3 springs in the middle for a firm tremolo feel, or 2 springs on the outside for a softer feel. The offset hook design lets you switch between 3 or 2 springs, with little or no cumbersome adjustment of the claw needed.

Custom Dome Knobs:  Our proprietary knobs feature a lower profile which is less likely to be accidentally hit by the player's hand, and the white dot lets you easily see where your knob rotation is set.

Boneite Nute:  We use "Boneite," a synthetic bone nut, that is more consistent than natural bone, on all Reverend instruments. It reduces friction, allowing the strings to slide through the nut slots smoothly, improving tuning stability.

Triple-Tree String Tree:  This patent-pending string tree has an extended bar to hold down three strings at a time with just one tree, eliminating G string buzz in the nut slot.

Dual-Action Truss Rod:  Our dual action rod adjusts in both directions, allowing back bow or forward bow. This assures correct adjustment range is possible regardless of string tension, extreme climate conditions, or the effects of long term aging. It’s also located at the headstock for easy access.

Six-Bolt Neck Plate:  Two extra bolts increase mounting pressure of the neck by fifty percent. This makes a stronger neck connection, which improves sustain, tuning stability, and neck alignment.

Pure Tone Jack:  All Reverends use an upgraded jack by Pure Tone Technologies. A standard jack has single contacts, but the Pure Tone jack has dual contacts for improved grip, audio signal and reliability. The most dependable guitar jack available.

Treble Bleed Circuit:  All Reverend guitars have a treble bleed circuit, preserving the treble when you roll back the volume control. When you roll back a standard volume control, the tone loses treble and becomes dull sounding. Now you can turn down and still sound great!

10% Pots:  We use Alpha control pots with a +-10% rating. While a typical pot is +-20%, our pots are built to tighter specifications, making them more consistent. Typically used in expensive boutique guitars, but standard issue in all Reverends.

10% Poly Caps:  We use caps with a +-10% rating, while a typical cap is +-20%. Our caps are made to tighter specifications, so they’re more consistent. Made of polyester, they’re also longer lasting, and less affected by temperature than cheaper ceramic caps. Typically used in expensive boutique guitars.

SPECIFICATIONS

Body:  Korina Solidbody
Pickups:  Heavy 90 Bridge, Nuevo 90 Neck
Bridge:  Wilkinson WVS50 IIK Tremolo
Neck:  Roasted Maple
Scale:  25 1/2"
Neck Profile:  Medium Oval
Fingerboard:  Pau Ferro 12" Radius
Frets:  22 - 0.110"W x 0.050"H
Truss Rod:  Dual Action - Headstock Access
Tuners:  Reverend Pin-Lock
Nut:  43mm Width - Boneite
Controls:  Volume, Tone, Bass Contour, 3-way
Strings:  10-46